JST XSR Cross Reference

The Micro-Ray MR-A0600 series is a form-, fit- and function-equivalent replacement for the JST XSR series. All 14 part numbers cross-reference below, JST part number first and the Micro-Ray equivalent beside it. Every part is manufactured to Micro-Ray quality standards and is available made to order.

JST XSR Equivalent Wire-to-Board Connector MR-A0600 (0.60mm Pitch)

The Micro-Ray MR-A0600 0.60mm Pitch Wire-to-Board Connector is a form-, fit- and function-equivalent replacement for the JST XSR series.All 14 part numbers cross-reference directly — see the full JST XSR cross reference. Built to Micro-Ray quality...

Product page › Drawing (PDF) ›

Request a quote

MR-A0600HI series

Circuits	JST P/N	Micro-Ray P/N
2	02XSR-36S	MR-A0600HI-02-L0BK
4	04XSR-36S	MR-A0600HI-04-L0BK
6	06XSR-36S	MR-A0600HI-06-L0BK
10	10XSR-36S	MR-A0600HI-10-L0BK
16	16XSR-36S	MR-A0600HI-16-L0BK
20	20XSR-36S	MR-A0600HI-20-L0BK
22	22XSR-36S	MR-A0600HI-22-L0BK

MR-A0600WRS series

Circuits	JST P/N	Micro-Ray P/N
2	SM02B-XSRS-ETB	MR-A0600WRS-02-L0NAT
4	SM04B-XSRS-ETB	MR-A0600WRS-04-L0NAT
6	SM06B-XSRS-ETB	MR-A0600WRS-06-L0NAT
10	SM10B-XSRS-ETB	MR-A0600WRS-10-L0NAT
16	SM16B-XSRS-ETB	MR-A0600WRS-16-L0NAT
20	SM20B-XSRS-ETB	MR-A0600WRS-20-L0NAT
22	SM22B-XSRS-ETB	MR-A0600WRS-22-L0NAT

Micro-Ray parts are equivalents manufactured by Micro-Ray Electronics, Brick, New Jersey. JST part numbers are shown for cross-reference identification only and remain the property of their respective owner.

‹ All JST cross references

Trademark noticeAll manufacturer names, brand names, trade names, logos, model numbers and part numbers appearing on this site — including but not limited to AMP, TE Connectivity, Molex, JST, Phoenix Contact and Hirose — are the property of their respective owners. Micro-Ray Electronics, Inc. is not affiliated with, authorized by, sponsored by or endorsed by any of these companies, except where Micro-Ray Electronics is expressly identified on this site as an authorized distributor or brand partner. Manufacturer part numbers are used solely to identify the original part for which a Micro-Ray part is offered as an equivalent, and no claim is made to any third-party trademark. Micro-Ray parts are our own products, cross-referenced for form, fit and function; they are not the original manufacturer’s parts and carry no original manufacturer warranty.

Full Terms & Conditions of Sale, including our second-source equivalency, technical-data, warranty and liability statements.